New Stahls' Premium Plus™ Heat Transfer Vinyl - 20" x 12"

Was: $7.20
Now: $4.32
Write a Review
Bulk Pricing:
Buy in bulk and save

Product Description

Price for 20" X 12" Sheet   NOTE: Vinyl may be +/- 1/4"

 

add to favorites

 

NEW CAD-CUT® Premium Plus™ Heat Transfer Vinyl

 

Now with more colors and high and low-tack options.

 
  • Applies at a low temp to prevent scorching on heat-sensitive items
  • Soft & Stretchable
  • Silky matte finish
  • Choose low tack for larger designs, high tack for more detailed designs
  • High tack peels hot for quick production and no distortion of design on stretchy fabrics

 

Material Specifications

 

 

 

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Pressure-Sensitive
  • Thickness: 
    Low Tack: 80-108 microns/.080-108mm
    High Tack: 92 microns/.092mm
  • Stretch & Rebound: 5
  • Washability: 50
  • Safety: CPSIA Certified

Low Tack Application Instructions

Time:8-12 Seconds
Temperature:280-300°F/138-149°C
Pressure:Medium
Peel:Warm or Cold
Two-ColorTack background 2 seconds, peel warm, place foreground on top, 8 seconds
Note:Stahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester.

High Tack Application Instructions

Time:8-12 Seconds
Temp:280-300°F/138-149°C
Pressure:Medium
Peel:Hot
Two-Color5 seconds, peel hot, next layer 5 seconds, peel hot, cover again, heat apply for 5 seconds
Note:Stahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester.

Material/Fabric Compatibility

  • 100% Cotton
  • 100% Preshrunk Cotton
  • 100% Polyester
  • Cotton/Poly Blends
  • Lycra/Spandex Blends

 

Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

 

Cutter Guidelines

Cutter Blade Force Offset Speed
Graphtec (Low Tack) 45° 11 1 35
Graphtec (High Tack) 45° 10 .3 mm 64 cm/s
Roland GS-24 45° 60-70g .25 25 cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

 

Videos

Customers Also Viewed